6063-T5 aluminum alloy is the mainstream solar frame profile in the photovoltaic industry. Ngezakhiwo ezilinganiselayo zemishini, ukumelana nesimo sezulu esiqinile kanye nokusebenza kwezindleko eziphezulu, kufanelekile ezimweni eziningi zokufaka i-photovoltaic.Imvelo kanye nezimo zomthwalo wezindawo zokufaka ezihlukene zihluke kakhulu. Accurate matching of profiles can maximize the service life and operation stability of photovoltaic systems.
Kungani i-6063-T5 Aluminium Solar Frames Isetshenziswa Kakhulu Kuzinhlelo ze-PV
Definition andPi-rocessCama-haracteristics
I-6063-T5 iyingxenye ye-6 ye-aluminium-magnesium-silicon alloy, okuyizinto eziyinhloko zokwakha kanye namaphrofayili esakhiwo futhi ifanele izinqubo ezihlukahlukene zokunemba kwe-extrusion.Inqubo yokwelapha ukushisa kwe-T5 ipholisa ukuguga okwenziwa ngemuva kokubunjwa kokushisa okuphezulu kwe-extrusion, ngaphandle kokwelashwa kwesisombululo esiqinile esiphelele, ukusebenza kahle kokubumba okuphezulu nokuzinza okuqinile komkhiqizo ophelile.
Iphrofayili inobulukhuni obumaphakathi nokuqina, igwema ukungalungi kokuba lukhuni kakhulu futhi i-brittle, ithambile kakhulu futhi kulula ukuyilimaza, futhi ivumelanisa ngokuphelele nezidingo eziqondile zokucubungula isakhiwo samafreyimu e-photovoltaic.Uma kuqhathaniswa namanye ama-alloys e-aluminium anamandla aphezulu, ukukhanya kwayo okungaphezulu kuphezulu, futhi umphumela wokwelapha ongaphezulu njengokufafaza okulandelanayo kuba ngcono kanye ne-anodization elandelayo.
MezobuchwepheshePimpahlaPama-aramu
Lapho ubukhulu bephrofayili ye-6063-T5 e-extruded iphakathi kuka-3 kuya ku-25 mm, amandla e-tensile azinzile ku-160 kuya ku-175MPa, futhi amandla okukhiqiza angafinyelela ku-110 kuya ku-130MPa, elungele izidingo ezivamile zomthwalo wemishini ye-photovoltaic yangaphandle.
Nakuba amandla ayo engaphansi kancane kune-6005-T5, i-6061-T6 namanye ama-alloys, ihlangabezana ngokugcwele nezindinganiso zokusekelwa kwesakhiwo semishini ye-civil kanye nevamile yezimboni nezentengiselwano ze-photovoltaic.Imingcele yemishini elinganiselayo ivumela ukuthi ifinyelele ukulingana okuhle phakathi kokungasindi nokuzinza, ukuzivumelanisa nokufika kwamaphrojekthi amakhulu we-photovoltaic.
Izizathu Eziyinhloko Zokuduma
The profile comes with a natural dense oxidation protective film. Ngemva kokumataniswa nenqubo ye-anodic oxidation, ingamelana nokugqwala kwangaphandle njengemisebe ye-ultraviolet, umoya nemvula, umswakama, njll., futhi ingasetshenziswa ngokuzinza iminyaka engaphezu kwengu-25, ehlangabezana nezidingo eziyinhloko zemishini ye-photovoltaic yesevisi ende.
I-conductivity yayo eshisayo ihle kakhulu, engakwazi ukuguqula ngokushesha ukushisa okukhiqizwa iphaneli ye-photovoltaic futhi igweme ukuncishiswa kokushisa okuphezulu kwe-module.Ngasikhathi sinye, izinto ezisetshenziswayo zingaphinde zisetshenziswe ngokungapheli, okuhambisana nomqondo wokuthuthukiswa kwekhabhoni eluhlaza kanye ne-low-carbon yemboni ye-photovoltaic futhi ihlangabezana nezindinganiso zesitifiketi sesakhiwo esiluhlaza.
I-Solar Systems Yezindlu Zokuhlala Esebenzisa I-6063-T5 Aluminium Frames
DevelopmentStatus ofHouseholdRooftopPi-hotovoltaicMarket
Ngokuthandwa komqondo wokonga amandla kanye nokunciphisa i-carbon kanye nokwehliswa kwentengo kagesi we-photovoltaic, i-photovoltaic yophahla lwasendlini isibe yinketho evamile yokonga ugesi wasendlini, ukunciphisa izindleko kanye nokwenyuka kwemali engenayo. Small distributed photovoltaic systems of 5 to 15KW are the most common.
Most of the roofs of residents are flat roof or inclined roof structures, and some old houses have limited load-bearing capacity, which has strict comprehensive requirements for the weight, installation difficulty and appearance adaptability of photovoltaic equipment.
Adapting to theCoreAdvantages ofHouseholdRi-PV ephezulu
Iphrofayili ye-6063-T5 inezici ezingasindi ezivelele. Uma kuqhathaniswa nefreyimu yensimbi, inganciphisa kakhulu ingcindezi yokuthwala uphahla. Old houses do not need additional structural reinforcement, which greatly reduces installation threshold and renovation cost of household photovoltaic.
The profile has excellent weather resistance and corrosion resistance, can resist UV exposure, rain erosion and temperature difference changes for a long time, and is not easy to rust and deform for a long time. Ilungele isikhathi sewaranti esingaphezu kweminyaka engama-25.
Home PVProfileC-namandlaProductsComparativeAdvantages
6005-T5, 6061-T6 and other alloys have higher strength, but they are difficult to extrude, have poor surface texture, and have higher production costs, which do not meet the lightweight and cost-effective requirements of ordinary household PV.
Although the steel frame has high cost performance, it is easy to increase the roof load due to its heavy weight, and it is easy to rust and corrode. Izindleko zokulungisa ziphezulu esikhathini sakamuva, futhi isipiliyoni sokusebenzisa esibanzi singaphansi kakhulu kumaphrofayili e-aluminium alloy angu-6063-T5.
Amaphrojekthi weSolar we-Commercial Rooftop Afanele amafreyimu e-Aluminium angu-6063-T5
Izimpawu Zokuthuthukiswa Kwemiklamo Yezimboni Nezohwebo Yophahla Lwesithombe Somlilo
Industrial and commercial buildings such as factory buildings, office buildings and supermarkets have a wide roof area and little shelter, which is suitable for building large photovoltaic arrays of 100KW to several megawatts, which is the core application scenario of distributed photovoltaic.
Industrial and commercial photovoltaic can effectively reduce the daytime power consumption cost of enterprises and assist enterprises to achieve ESG green index. Umjikelezo wempilo yephrojekthi mude njengeminyaka engama-25 - 30, futhi izidingo zokuzinza kwamaphrofayili ziphezulu kakhulu.
Adapt to theCoreValues ofIzezimboni kanyeCommercialRoofs
Uphahla oluningi lwezimboni nohwebo lunamanani omkhawulo wokuthwala. The lightweight characteristics of 6063-T5 can avoid large-scale roof reinforcement operation, shorten the project construction period and effectively reduce the overall investment cost of enterprise photovoltaic projects.
izinqubo ze-extrusion zokunemba okuphezulu zingakwazi ukubona ukuthi i-mol ehlanganisiwe ye-frame clamping groove kanye nesakhiwo sokukhipha amanzi, ukuze ukuhlelwa kwamamojula we-photovoltaic kube njalo, ukusebenza kahle kwe-drainage kuphakeme, kanye nezinqubo zokukhishwa kwe-high-precision extrusion zifanele ukufakwa okujwayelekile kwezindawo ezinkulu ze-photovoltaic zezimboni nezentengiso.
Ncenga.
Ukukhetha kanyeAukuzijwayezaCriteria forIzezimboni kanyeCommercialSceneProfiles
Conventional load, the pursuit of cost performance and installation efficiency of industrial and commercial roof, preferred 6063-T5 aluminum frame, can realize the optimal balance of performance and cost, adapt to the vast majority of standardized projects.
High snowfall, high wind pressure and other extreme load area of industrial and commercial projects, can be used in combination, the main girder selection of high strength alloy, frame use 6063-T5, both stability and economy.
I-Ground Mounted Solar Systems Esebenzisa i-6063-T5 Aluminium Frames
Izimo Zokusebenza kanye Namaphuzu Obuhlungu Wohlelo Lwe-PV Ephansi
The ground photovoltaic system covers community photovoltaic power stations, large-scale photovoltaic farms, etc., and can flexibly adjust the inclination and orientation of modules, resulting in higher power generation efficiency. Kuyindlela yokufika eyinhloko ye-centralized photovoltaic.
Photovoltaic equipment in open-air field faces strong wind, blizzard and sand erosion for a long time, and the soil humidity and pH are greatly different, so the requirements for corrosion resistance and structural stability of profiles are stricter.
Adapt to theCoreAdvantages ofTerrestrialPi-hotovoltaic
The high-precision extruded frame has its own routing and drainage structure, which can optimize the layout of photovoltaic array, improve the arrangement density of modules, and effectively improve the power generation utilization rate of large-scale ground power stations.
The profiles have excellent fatigue resistance, can withstand outdoor dynamic wind and snow pressure for a long time, and have stable mechanical properties, and will not deform and crack due to long-term environmental loads.
FloorPi-hotovoltaicProfileSelectionAukuzijwayezaScheme
The climate is mild, the load is conventional fixed inclination ground photovoltaic power station, 6063-T5 aluminum frame can fully meet the use requirements, is the best material with high cost performance.
For large-scale power stations in extreme environments such as hurricanes and heavy snowfalls, the frame can use 6063-T5, and the main support structure is matched with high-strength alloy to balance project cost and operation safety.
I-Solar Carports Ezuza Ku-6063-T5 Aluminium Frames
Izimo Zokusebenza kanye Namaphuzu Obuhlungu Wohlelo Lwe-PV Ephansi
The ground photovoltaic system covers community photovoltaic power stations, large-scale photovoltaic farms, etc., and can flexibly adjust the inclination and orientation of modules, resulting in higher power generation efficiency. Kuyindlela yokufika eyinhloko ye-centralized photovoltaic.
Photovoltaic equipment in open-air field faces strong wind, blizzard and sand erosion for a long time, and the soil humidity and pH are greatly different, so the requirements for corrosion resistance and structural stability of profiles are stricter.
Adapt to theCoreAdvantages ofTerrestrialPi-hotovoltaic
The high-precision extruded frame has its own routing and drainage structure, which can optimize the layout of photovoltaic array, improve the arrangement density of modules, and effectively improve the power generation utilization rate of large-scale ground power stations.
The profiles have excellent fatigue resistance, can withstand outdoor dynamic wind and snow pressure for a long time, and have stable mechanical properties, and will not deform and crack due to long-term environmental loads.
FloorPi-hotovoltaicProfileSelectionAukuzijwayezaScheme
The climate is mild, the load is conventional fixed inclination ground photovoltaic power station, 6063-T5 aluminum frame can fully meet the use requirements, is the best material with high cost performance.
For large-scale power stations in extreme environments such as hurricanes and heavy snowfalls, the frame can use 6063-T5, and the main support structure is matched with high-strength alloy to balance project cost and operation safety.
I-Agricultural Solar Systems Ifanele i-6063-T5 Aluminium Frames
IsiceloCharacteristics ofAi-gro-solarComplementaryPi-hotovoltaicSuhlelo
I-Agricultural photovoltaic complementary photovoltaic ibona ukuthuthukiswa okuhambisanayo kokukhiqizwa kwamandla kagesi we-photovoltaic, ukutshala ezolimo kanye nokuzalanisa, futhi isebenzisa kahle imithombo yomhlaba, engathuthukisi imali engenayo yabalimi kuphela, kodwa futhi kusiza ukuthandwa okukhulu kwemboni ye-photovoltaic.
Agricultural site environment is complex, equipment needs to withstand dust, irrigation water vapor, fertilizer slight corrosion, at the same time need to reserve sufficient space for agricultural machinery operation and crop growth.
Adapting to theCoreAdvantages ofComplementaryAgricultural andLubusukuPamadwala
It can be customized to extrude the elevated frame structure, improve the installation height of photovoltaic modules, reserve sufficient space for agricultural machinery operation and crop growth, and realize planting and power generation.
The profile has excellent heat dissipation performance, can optimize the working temperature of the component, and at the same time moderately adjust the light intensity under the shed to meet the growth light requirements of various crops and green plants.
AgriculturalPi-hotovoltaicProfileSukhetho kanyeAukuzijwayezaPoints
Small and medium-sized farms, ordinary planting and breeding base of agricultural light complementary projects, 6063-T5 aluminum frame performance is fully up to standard, cost-effective outstanding, suitable for large-scale popularization and application.
The large-scale agricultural photovoltaic power station can adopt the matching scheme, the supporting main beam selects the high-strength profile, and the frame uses 6063-T5, taking into account the stability of the project and the construction cost.
Amaphrojekthi Elanga Lasogwini Adinga Amafreyimu E-Aluminium Angagqwali
I-Coastal PV Project Core Pain Points
Indawo esogwini inokukhanya okwanele kanye nezinsiza zomoya eziningi, okuyindawo eyinhloko yokufika yamaphrojekthi we-photovoltaic. Nokho, inkungu kasawoti, umswakama ophezulu kanye nemisebe eqinile ye-ultraviolet kulula ukubangela ukugqwala nokuguga kwamaphrofayili ensimbi.
Amaion e-chlorine athwalwa umoya wasolwandle azosheshisa ukugoba nokuqhekeka kwezinsimbi ezivamile. Isimo sezulu esibi kakhulu sesishingishane sizohlola ukumelana nomthwalo womoya wamaphrofayili, okudinga ukumelana nokugqwala okuphezulu kanye nokuzinza kwamaphrofayili.
Adapt to theCoreAdvantages ofCi-PV ye-oastalCi-orrosion
I-6063-T5 aluminium alloy inokuqukethwe kwethusi okuphansi kakhulu, okunciphisa izingozi zokugqwala kusuka empandeni yento. Ifilimu layo le-oxide eliziphilisayo lingakwazi ukuhlukanisa ngempumelelo inkungu kasawoti kanye nomswakama futhi limelane nokugqwala kwe-chloride ion.
With thick anodizing process, the profile can form a multi-layer protection system, completely adapt to the coastal high salt fog, high humidity environment, 25 years of use cycle without frequent anti-corrosion maintenance.
Ukuqhathaniswa kweCoastalPi-hotovoltaicProfiles
Galvanized steel is easy to rust and peel off in coastal environment, and the cost of maintenance and replacement in the later period is extremely high, which cannot meet the requirements of long-term stable operation of photovoltaic, and the service life is greatly shortened.
Other high-strength aluminum alloys have corrosion resistance, molding texture is not as good as 6063-T5, and the cost is higher, making it a cost-effective choice for coastal photovoltaic project frames.
Ungayikhetha Kanjani Indawo Elungile Yokufaka I-6063-T5 Aluminium Solar Frames
Umthelela Wendawo Yendawo Kumpilo Yesevisi Yephrofayela
6063-T5 profile has excellent comprehensive performance, but the corrosion, load and temperature difference conditions of different installation scenarios will directly affect the stability and service life of the frame.
Scientific site selection can give full play to the core advantages of light weight, corrosion resistance and weather resistance, avoid environmental risks, and maximize the operating efficiency and return on investment of photovoltaic systems.
IngqikithiCama-osiderations wefreyimu ye-PVIukumiswaSintoSelection
It is necessary to give priority to the evaluation of site lighting resources, select areas with sufficient light and less occlusion, and match the adaptation structure of 6063-T5 frame to ensure that photovoltaic modules maximize the absorption of light energy for power generation.
To accurately distinguish the type of site environment, coastal and industrial areas need to be thickened for anti-corrosion treatment, and standard profiles can be used in inland urban and rural conventional environments to meet different anti-corrosion needs.
ScenarioAdaptation Izinzuzo zokuvumelana nezimo
Compared with traditional materials such as steel, the lightweight characteristics of 6063-T5 unlock a variety of restricted installation scenarios such as old roofs and soft land, broadening the landing range of photovoltaic projects.
Customizable protection technology and structural design, so that profiles adapt to inland, coastal, urban and rural, agricultural and other full scenes, is one of the most comprehensive adaptation of photovoltaic frame profiles.
Isiphetho
Ngezinzuzo zesisindo sokukhanya, amandla aphezulu, ukumelana nokugqwala kanye nokumelana nesimo sezulu, uhlaka lwe-aluminium 6063-T5 lwelanga lufaneleka ngokugcwele endlini, izimboni nezentengiselwano, umhlabathi, ishede, ukukhanya kwezolimo, izimo ze-photovoltaic ezisogwini nezinye.
I-Henan Retop Industrial Co., Ltd. Izoba Khona Noma Kunini Noma Kunini Noma Kuphi Okudingayo
Wamukelekile ku-: ucingo, umlayezo, i-Wechat, i-imeyili & Seaching us, njll.
I-imeyili:
sales@retop-industry.com
I-Whatsapp/Ifoni:
0086-15537183797
